Last updated: November 2026
Payroll RFP: What to Ask, How to Score It, and a Free Template
A payroll RFP turns sales pitches into quotes you can compare. A request for proposal (RFP) sends every provider the same questions and the same pricing form, with one due date. The answers come back in writing, side by side, instead of spread across separate sales calls.
What an RFP does for the buyer
Written answers become a record. If a provider says it files local taxes in a city where you have employees, that answer is on paper under its name, and it can go into the contract.
The shared pricing form does the most work. One provider may quote per employee per month, another per payroll run, and a third a base fee plus add-ons. Asking each one to fill in the same lines turns three formats into one table you can total.
An RFP also sets the pace for payroll vendor selection. A due date, a deadline for questions and one contact person keep every provider on the same schedule. Each answer to a provider’s question goes to all of them, so nobody bids on information the others lack.
When a formal RFP is worth the time
A formal RFP earns its time when several providers could fit, the job covers more than payroll (time tracking, benefits, an HR system), or prices come only by quote.
It is not worth it for a business with a handful of employees in one state, choosing among providers that publish their rates. Compare which payroll providers publish their prices, then send a short list of questions instead.
Public agencies, schools and some grant-funded nonprofits sit at the other end. A procurement law or policy may set the steps for them whatever their size. Follow that process first, and use a template only for the payroll questions inside it.
An RFP costs time and attention. Writing the RFP, answering questions, scoring and holding demos take staff time, and a long RFP can discourage providers from answering at all.
How to run a payroll RFP
Before the first live payroll, plan at least two parallel runs. In each one, the new provider runs a payroll alongside the old one, and you compare the results line by line before switching. Going live at the start of a quarter or a year means fewer running totals to carry into the new system.
What to include in a payroll RFP template
The areas below are the core of the request. Each one is there because a weak answer in that area costs money or time after the contract is signed.
| Area | What to ask | Why it matters |
|---|---|---|
| Company profile | Ownership, years in business, clients of your size, any recent change of owner | Tells you who you are signing with and who will support the account. |
| Current setup | Your side: headcount, pay groups, frequencies, states, systems and problems today | A provider cannot scope or price work it cannot see. |
| Payroll and tax filing in every state | Which federal, state and local returns and deposits they handle, new state registrations, W-2 and 1099 forms, amended returns | An unregistered state account or a missed local tax turns into agency notices. |
| Tax notices and penalties | Who answers an agency notice, and whether any written tax guarantee covers the product quoted, including late deposits, penalties and interest caused by the provider’s error | The answer belongs in writing before an error happens. |
| Time and attendance | Overtime rules, accruals, approvals, and how hours reach payroll | An hours error flows straight into pay. |
| Benefits administration | Deductions, enrollment, feeds to insurance carriers, catching up missed deductions | A deduction that stops or doubles shows up on the employee’s check. |
| Integrations | General ledger export, HR system, time clocks, benefit carriers | Every figure keyed in twice is another chance for a mismatch. |
| Reporting | Standard reports, custom reports, exports to spreadsheets | Month-end and audit requests depend on getting data out. |
| Employee self-service | Pay stubs, W-4 and direct deposit changes, mobile access | Changes employees make themselves are changes payroll staff do not key. |
| Security audit reports | Current SOC 1 Type II and SOC 2 Type II reports, the period each covers, how data is protected | A SOC 1 report covers controls that affect your financial reporting. A SOC 2 report covers the security of the provider’s systems. |
| AI features | What each AI feature does with payroll data, whether a person approves any change to pay, whether your data trains the provider’s AI and whether that is on by default, what is logged | A feature that can change a pay result needs an approval step and an audit trail. |
| Implementation plan and timeline | Project plan, go-live date, whether the fee is fixed, data conversion, parallel runs, training, the hours your staff must give, and what happens if the provider’s team changes | The schedule rests on both sides, so ask what the provider expects from you. |
| Service levels | Response times by severity, support hours, a named contact, the escalation path, and how support staffing has changed in the last 12 months | Payday problems need an answer the same day. |
| Pricing | Base fee, per employee per month, each add-on, year-end forms, implementation fees | The same lines from every provider make the totals comparable. |
| Contract | Price guarantee period, scheduled increases, cancellation notice, renewal terms | These decide what the third year costs and how you leave. |
| Data ownership and exit | Who owns the data, the export format, help moving to the next provider | Leaving is far easier when the export terms are agreed at the start. |
| References | Three employers of your size, in your states | A reference in your situation can speak to the parts that matter to you. |
Give the contract lines one question each. A price guarantee period, the scheduled increases and the cancellation notice are separate terms, and a quote can state one of them without the others.
Ask for SOC reports by name and type. A Type II report tests controls over a period of months, while a Type I report describes them at a single date. If a report is several months old, ask whether a bridge letter covers the time since.
Confirm in writing which product and plan each quote covers. Then ask whether the AI shown in the demo works on that product and plan, and whether it is included or priced separately, now and at renewal.
Ask for the provider’s outage plan, and whether you could rerun the last payroll if its system went down on a payday. The employer stays responsible for paying employees on time during a provider outage.
How to score payroll RFP responses
Set the weights before the first response arrives and keep them on file. List the areas you will score, but keep the weights to yourself unless a procurement rule requires you to publish them. Screen the must-haves first. A provider that cannot file in one of your states is out, however well it scores elsewhere.
Score each area from 1 to 5, multiply by its weight, add the results, and divide by 5. A provider that scores 5 everywhere totals 100.
Have two people score separately, then talk through any area where they differ by more than a point.
In the example below, the weights and scores are made up to show the method.
| Area | Weight | Provider 1 | Provider 2 | Provider 3 |
|---|---|---|---|---|
| Payroll and tax filing | 35 | 4 | 5 | 3 |
| Total cost over the contract term | 25 | 3 | 2 | 5 |
| Implementation | 15 | 4 | 3 | 3 |
| Service levels | 15 | 3 | 4 | 3 |
| Contract terms | 10 | 2 | 4 | 3 |
| Weighted total, out of 100 | 100 | 68 | 74 | 70 |
Provider 3 has the best price score and still finishes second. At these weights, Provider 2’s stronger tax filing and contract terms outweigh its higher cost. Move 15 points from tax filing to cost, and Provider 3 wins with 76.
Watch out for yes-counting. A checklist scored by the share of yes answers counts every feature the same. A provider with many features you will never use can then outscore one that runs your payroll well.
Score what a provider showed in the demo or wrote in its response. A feature promised for a future release is not a feature yet.
Mistakes that make RFP answers hard to compare
- No pricing form, so every quote arrives in a different shape.
- Year-one prices only, with no view of increases across the contract term.
- Too many questions. Ask only what you will score, because a long RFP is slow to answer and slow to read.
- Must-haves that are really nice-to-haves, which knock out providers that could do the job.
- Features nobody will use, copied from an old RFP or a provider’s own checklist.
- No questions about leaving: who owns the data, in what format it comes out, and who helps move it.
- Choosing the system before deciding who on your staff will do the setup work.
Questions to ask in the demo
Give every finalist the same script, built on your own payroll, and watch each step run live.
- Pay an employee who lives in one state and works in another. For which state withholds, see state reciprocity agreements.
- Change a pay rate partway through a pay period, and show the retro pay on the next check.
- Set up a garnishment and show how the withheld amount is paid to the agency.
- Correct a check after payroll has run, and show which tax filings change.
- Run the general ledger export in the format your accounting system takes.
- Show how a tax agency notice is logged and answered.
- Show the approval step and the log for any change an AI feature suggests.
Hand each finalist the same past payroll register, with names removed and a few errors planted in it, and see which errors each one catches. For example, plant a wrong overtime rate, a duplicated bonus, a missing state tax ID and a retro raise applied wrong.
Get the payroll RFP template and scoring sheet
Get the free payroll RFP kit. It has an editable Word template with every section above and a pricing table providers fill in line by line. It also has an Excel scoring sheet with weights, pass or fail rows and totals for up to four providers. Enter your email and we’ll send both.
Before the RFP goes out, check which providers on your list publish rates and which quote on request in the payroll provider reviews, pricing, and comparisons.
Frequently asked questions
What should a payroll RFP include?
Start with your current setup and the questions by area. Add a pricing form every provider fills in the same way, the contract terms you want answered, the response format and due dates, and how answers will be scored.
Do I need an RFP to choose a payroll provider for a small business?
Not always. A business in one state choosing among providers that publish their prices can compare rates and ask a short list of questions. An RFP pays off when providers sell by quote, the job includes time, benefits or HR systems, or you need written answers to hold a provider to.
How long does a payroll RFP process take?
It runs on the dates you set: a questions deadline, a due date for responses, then scoring, demos, references and contract terms. Leave time after signing for setup, data conversion and parallel payroll runs before the first live payroll.
How do I compare payroll quotes from different providers?
Have every provider fill in the same pricing lines: base fee, per employee per month, each add-on, year-end forms and implementation. Then total each quote over the full contract term, not year one alone. Include the scheduled increases in each year’s total.
How many providers should get a payroll RFP?
Only the providers that meet your must-haves on paper. A short list keeps scoring and demos manageable, and the scoring sheet has columns for four providers.
What is the difference between an RFP, an RFI and an RFQ?
A request for information (RFI) asks providers to describe what they offer, before you are ready to buy. A request for quotation (RFQ) asks for a price on a fixed, defined service. An RFP asks how each provider would meet your needs and at what price, and you score both.
This is not legal or financial advice. Consult a qualified professional for your specific situation.